Fencesource Wave Slat Single Wall Bottom Locking Privacy Slat for 4 5 6 7 and 8 Chain Link Fence

Wave SlatTM – Single Wall Bottom Locking Slat for Chain Link Fence Available for Fence Heights: 4′, 5′, 6′, 7′ and 8′ Coverage: Each box will cover approximately 10 linear feet of fence (2″ diamond, 82 slats, 41 diamonds). The bottom locking devices are included (3 pieces) and will be enough for ten feet of fence. Specifications: Slat is manufactured 3.5″ shorter than the overall height of the fence to accommodate the locking device at the bottom of the fence (e.g. 6 ft is 68.5″) Wind load factor and privacy factor for 2″ diamond is approximately 85% (1.25″ [slat width] x 82 [number of slats] ÷ 120″ [10′ of fence] = 85.4% coverage) Slat width is approximately 1.25″ Designed for 2″ to 2.375″ diamond and 9, 10, 11, 11.5 gauge wire. A 2″ diamond will provide approximately 85% privacy and a larger diamond will have less privacy (smaller diamond size will provide better privacy). Made of HDPE (plastic) – High Density Polyethylene with UV inhibitors to help against sun fading. Other: Made in the USA. Installation: Insert the locking channel by sliding it through the bottom of the chain link fence (see picture). Insert the privacy slat from the top of the fence down towards the locking device at the bottom of the fence until it clicks into place. The locking device will help secure the slat into place. Measuring Chain Link Fence Diamond: The diamond of chain link is measured diagonally in both directions using inside dimensions (see picture).