Crl Track Assembly D603 Upper and D602 Lower Track With Nylon Wheels D2203

These Track Assemblies are smooth operating and will provide years of reliable service. They are easy-to-install. The two pieces of ‘H’ Bar for the bypassing doors have a 1-1/2″ (38 mm) overlap. CRL Cat. No. D332 End Caps for the ‘H’ Bar can be purchased separately. For dry glazing with 1/4″ (6 mm) glass use Cat. No. GC728C Vinyl sold separately). To provide security refer to the large selection of CRL Ratchet and Plunger Type Locks are available. NOTE: Maximum suggested panel size is 36″ W x 48″ H (914 mm x 1.22 m). General Glass Cutting: Guidelines Glass Height = Opening Height Minus 1-1/8″ (28.6 mm). Important Notes: If you need a very tight fit you should figure your own dimensions. The dimensions shown are just guideline dimensions that are satisfactory to most installers. D2203 Series = Rolling Track Assembly : Glass Height = Opening Minus 1-1/8″ D2204 Series = Rolling Track Assembly : Glass Height = Opening Minus 1-1/8″ D2300 Series = Rolling Track Assembly : Glass Height = Opening Minus 1-3/8″ D2301 Series = Rolling Track Assembly : Glass Height = Opening Minus 1-3/8″ D2303 Series = Rolling Track Assembly : Glass Height = Opening Minus 1-3/8″ D2305 Series = Rolling Track Assembly : Glass Height = Opening Minus 1-3/8″ D2306 Series = Rolling Track Assembly : Glass Height = Opening Minus 1-5/8″ D2307 Series = Rolling Track Assembly : Glass Height = Opening Minus 1-5/8″